NX2_FDX

Nexus FDX
Important note: If you are trying to register the NX2 Race Software via the window from the program it's self and it does not direct you to the proper site you may go directly to the Nexus Marine registration page and get the free registration code.
The NX2 Sail Performance software will not work with NMEA protocol.
Download FDX NX2 Race Version 1.05 (zip)
FDX Prerecorded test run Data .Zip FDX NX2 Race Software Manual. PDF FDX kit installation manual. PDF	RS232-USB driver download RS232-USB converter issues Polars & TBS
Classic Nexus sever owners and old NX2 non FDX server owners, may Upgrade to FDX Server.
What is FDX

The Fast Data eXchange, is the protocol that allows the PC to become a fully integrated NX2 instrument when connected to the NX2 Server.
The NX2 Sail performance software is free with all NX2 FDX Servers, bring your PC onboard & use all capabilities that the NX2 system can offer!

The Sail Performance software enables you to monitor all data in analogue or digital format, create waypoints and routes, logging all data, remotely control all digital & analog displays, calibrate the transducers with full system setup. You can also activate the NX2 Steer Pilot, set backlight levels on the instruments etc. In short - control the whole NX2 system.

Calibration window	Settings window	Options window	Com. port window

Click image for larger picture

The latest NX2 Sail Performance software can also be downloaded on the web for use with Silva NX2 FDX server based systems.

Connect your PC direct to the NX2 FDX Server PC port that normally is operating in NMEA0183 mode. When the NX2 Sail performance software is started, the Server will automatically switch over to FDX mode to be fully integrated with the NX2 system.

Sample Display on a PC Screen

The same time the Sail Performance is running with a GPS unit connected to the NX2 system all Navigational Information not only may viewed with the Sail performance but they may be send to an additional Charting Program via the Virtual Com port (NMEA) internal out-put.

.Note: Navigation from a PC NMEA SW is only possible for Servers of version 5.3 or later

The virtual port will only run on Windows 2000 or Windows XP.

The FDX software implements boat Polars via the *.nxp file, after installing the software go to the sail performance folder, C:\Program files\NX2 Sail Performance\Data\polar folder on your PC, open the *.nxp file and using the matrix insert your polar tables, then you may display your TBS at any Multi display with the FDX NX2 sail performance software.

If you have your Polars in Paper we may convert them to the *.nxp Polar file for you,

CME Price $ 200.00 (call for details)

For NX2 non FDX Server owners Upgrade your Server to the FDX version.

CME Price $ 245.00

For Classic Nexus owners Upgrade pack includes:

1 NX2 Multi Display, 1 FDX Server and 1 Depth transducer 200Khz 43mm/1.7".

CME Price $ 1,235.00

Limited availability please call;

Note: This program is distributed by Nexus Marine for free, after installing the program you will be asked to register via e-mail for free unlock code.

Note: Hellas Marine, Chicago Marine Electronics, Nexus Marine, SILVA and ComNav are not responsible for any problems or other issues may occur from the use of this program.

Note: This program is distributed with all NX2 Packages, can be downloaded and may be shared for free only.

Hit Counter

Contact us, Write, Fax, E-Mail,

Call M-F [9.00am-5.00pm Central US (- 6h GMT)] to:
Hellas Marine, Inc.

Chicago Marine Electronics
212 E. Crescent Ave.
Elmhurst IL. 60126

USA
Phone : +1 (630) 501-1938
Fax : +1 (630) 501-1939
" E-Mail "

Marine Electronics, Navigation & Marine products.

Note: Reproduction and copy of any page, picture, document or material used in the www.HellasMarine.com & www.ChicagoMarineElectronics.com web site for commercial or any other use with out written authorization from Hellas Marine, Inc. & Chicago Marine Electronics is prohibited.
Note: Posted prices do not include TAX for Illinois State residence, S&H, Installation, Training or Calibration of items sold.
Note: Minimum Shipping charge of $ 15.⁰⁰
Note: Products are not returnable, all sales are final, defective products are repaired or replaced by the manufacturer, as per manufacturer warranty.
Note: Our services are a person to person basis, to maintain our good prices and the latest software versions on product sold our stock is low, orders are processed by the date they received. Orders are NOT Billed/Charged until they are shipped.
Note: Prices subject to change with out prior notification. Contact us for details.

Created by Hellas Marine Inc.

www.HellasMarine.com